Medeek Floor Plugin

Started by Medeek, December 06, 2019, 11:43:25 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Medeek

First look at metal bridging (I-joist and Lumber):





Geometrically a lot simpler and more lightweight than the preconfigured component that I made based off of the Simpson IFC model.  I'm using my galvanized texture/material but I may change it slightly.  There are quite a few parameters that one can adjust to customize the look and feel of these metal bridging straps, hopefully that should make things configurable enough for most power users.

As noted per the Simpson literature the crossing straps should not be in direct contact to avoid screeching noises when they move under load.  Hence the default 1/8" gap, but this can be modified as can be seen in the menu.

I've also included a thickness parameter for the straps.  The correct thickness for a 20 gauge strap is probably around 0.035" however I've rounded the default value to an even 0.04".
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

Version 0.9.7 - 09.23.2024
- Updated the SUBTRACT feature with three other options.
- Added seven advanced options in the Floor tab of the Global Settings.
- Added metal bridging to the Draw and Edit menus.
- Added solid blocking (Lumber and I-Joist) to the Draw and Edit menus.
- Fixed minor bugs in the HTML menus and preset system.
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer


Medeek

Tutorial 3 - Metal Bridging and Blocking (10:28 min.)

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

Version 0.9.8 - 09.27.2024
- Made the polyline/face icon (draw mode) in the draw menu clickable.
- Added a joist direction toggle button/icon to the draw and edit menus.
- Added a stagger joist option to the Draw and Edit menus.
- Updated the insulation, blocking, metal bridging and hanger modules to accommodate staggered joists.
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

Version 0.9.9b - 10.01.2024
- Updated the Floor tab of the Global Settings with additional parameters for joist construction.
- Fixed a minor bug with the hanger module for double ply staggered studs.
- Fixed a bug in the Draw and Edit menus so that all hangers in the library are properly displayed.
- Added the following skewed (45 degree) Simpson hangers into the built-in library (skew_hangers): SUL410, SUL414, SUL214_2, SUL210_2, SUL26_2, SUR410, SUR414, SUR214_2, SUR210_2, SUR26_2

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer


Medeek

Version 0.9.9d - 10.03.2024
- Fixed critical bugs with saving of floor presets.
- Improved robustness of floor attribute library and data lookup methods.

Some incremental improvements but necessary. 

IMPORTANT
Note that the last few updates prior to this update introduced a number of new features that effectively disabled the saving of floor presets.  Please download this latest update to restore the ability to save floor presets.
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

Double rim joists with air gap, lapped and extended:



A quick test of the non-orthogonal floor types shows that the algorithm holds up as it should:

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

Version 0.9.9e - 10.04.2024
- Updated 2-Ply rim joists with air gap to extend joists that are in a lapped configuration.
- Updated the Floor tab of the Global Settings with even more parameters for joist construction.
- Added the following face mount Simpson hangers into the built-in library: MIU1819, MIU18111, MIU18114, MIU18116, MIU18118.



Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

One additional parameter for removing specific rim boards:

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer