Author Topic: Need help for cold shed roof  (Read 587 times)

0 Members and 1 Guest are viewing this topic.

Offline JayCheng

  • Newbie
  • Posts: 2
  • Welcome to the CP-Forum
Need help for cold shed roof
« on: March 08, 2019, 07:09:44 AM »
Hello,
I have a shed roof (against a main building) with ice damming issue during the cold seasons. Is it a good idea to add a frame on the existing shed roof and put metal roof singles on the frame acting like a cold roof? If it is feasible, any plan would be appreciated. By the way, there is a lot of heavy snow here. Thank you very much.
Jay Cheng

Offline NathanS

  • Senior Member
  • ****
  • Posts: 649
  • NY Mountains
Re: Need help for cold shed roof
« Reply #1 on: March 09, 2019, 03:59:35 AM »
Jay, it's hard to know exactly what is going on, but generally, ice damming is from a combination of poor ventilation and not enough insulation. Adding a frame on top the current roof, starting with vertical furring strips, is a good start - make sure air can freely get in the bottom, and exit at the top. The top exit is going to be tricky with proper endwall flashing.

A picture or two might also help people give you solutions.

Offline JayCheng

  • Newbie
  • Posts: 2
  • Welcome to the CP-Forum
Re: Need help for cold shed roof
« Reply #2 on: March 11, 2019, 07:06:08 AM »
Thank you Nathan.

 

Templates: 5: index (default), Ads (default), Portal (default), Display (default), GenericControls (default).
Sub templates: 12: init, html_above, adsheaders_above, body_above, adsindex_above, portal_above, main, portal_below, adsindex_below, body_below, adsheaders_below, html_below.
Language files: 3: SPortal.english (default), index+Modifications.english (default), Ads.english (default).
Style sheets: 1: portal (default).
Files included: 37 - 1124KB. (show)
Cache hits: 11: 0.00193s for 40,686 bytes (show)
Queries used: 29.

[Show Queries]