Started by ajbremer, March 21, 2016, 02:46:04 AM
0 Members and 1 Guest are viewing this topic.
Quote from: ajbremer on April 11, 2016, 03:10:32 PMMonday - April 11th, 2016Thanks again John, I totally get it now!It took me a bit of deep thought to catch everything you meant but I workedit out in my head step by step and now I get it. That's a cool idea, I definetlydidn't think about doing that. Anything 1" thick would work though right?
Quote from: pmichelsen on April 18, 2016, 12:42:09 PMAnother option I've done when I had to cut a lot of posts, was to make a jig that slips around the post and clamps into place. The last one I made I even got a little fancy and had two layers, a thin 1/4" layer that aligned with my line and a wider 3/4" layer that aligns with the shoe on my circular saw. Once it's clamped just run the saw all the way around and you have a perfect cut.
Quote from: ajbremer on April 18, 2016, 03:12:37 PMHere is ReciProMate, it's what I was talking about in one of the previous videos: