Author Topic: Medeek Electrical Plugin  (Read 8897 times)

0 Members and 1 Guest are viewing this topic.

Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #100 on: November 12, 2020, 01:35:38 AM »
First look at UK electrical outlets and switches in the electrical estimator:

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #101 on: November 12, 2020, 10:18:15 PM »
Version 1.2.5 - 11.12.2020
- Added data (low voltage) outlets, lights, panels, UK outlets, and UK switches to the Medeek Electrical Estimator.



The following (six) electrical elements still need to be added into the Electrical Estimator:

Safety Devices, Heaters, Vents, Floor Outlets, Low Voltage Panels, Misc. Fixtures
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer


Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #102 on: November 13, 2020, 07:14:44 PM »
Version 1.2.6- 11.13.2020
- Added Safety Devices, Heaters, Vents, Floor Outlets, Low Voltage Panels and Misc. Fixtures to the Medeek Electrical Estimator.

The Electrical Estimator is now complete.  I still need to change up the CSI numbers for the various components but for now I've just used my own default numbering system.  I will need to get with some electrical contractors on what are the appropriate numbers to use.

I will now turn my attention to more pressing matters involving the Truss plugin.
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #103 on: February 13, 2021, 11:04:44 AM »
Version 1.2.7 - 02.13.2021
- Enabled the ability to draw outlets and switches with Medeek Polyline Stemwall assemblies.

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #104 on: February 13, 2021, 09:46:26 PM »
Version 1.2.7b - 02.13.2021
- Enabled the ability to draw UK outlets and switches with Medeek Polyline Stemwall assemblies.

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer


Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #105 on: April 30, 2021, 05:10:26 PM »
Version 1.2.8 - 04.30.2021
- Added optional metadata parameters for UK outlets and switches: description, circuit.
- Added a circuit callout parameter in the General tab of the global settings.
- Added a 5th dimensioning layer specifically for circuit callouts in the Layers tab of the Global Settings.
- Enabled circuit callouts for the following fixtures: Switches, Outlets, UK Switches and UK Outlets.



Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #106 on: May 30, 2021, 11:02:49 AM »
Version 1.2.9 - 05.30.2021
- Added an option for vertically offsetting text and symbols within the General tab of the Global Settings.
- Annotation text and symbols for outlets, switches, UK outlets and UK switches can be vertically offset a custom amount from the bottom of the wall.



Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #107 on: June 01, 2021, 06:07:56 PM »
Version 1.3.0 - 06.01.2021
- Added four additional parameters to the "User Interface" section of the General tab of the global settings. This allows the customization (colors) of the HTML menus and buttons.

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Offline Medeek

  • Journeyman
  • *****
  • Posts: 2,033
  • Structural Engineering
    • The Engineering and Design Firm of Medeek
Re: Medeek Electrical Plugin
« Reply #108 on: June 15, 2021, 11:21:54 PM »
Version 1.3.1 - 06.16.2021
- Updated the wiring module/algorithm to improve performance and overall robustness.
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer


 

Templates: 4: index (default), Ads (default), Display (default), GenericControls (default).
Sub templates: 10: init, html_above, adsheaders_above, body_above, adsindex_above, main, adsindex_below, body_below, adsheaders_below, html_below.
Language files: 2: index+Modifications.english (default), Ads.english (default).
Style sheets: 0: .
Files included: 32 - 867KB. (show)
Cache hits: 12: 0.00144s for 40,823 bytes (show)
Queries used: 27.

[Show Queries]