Author Topic: Re: Making frame walls rigid  (Read 48759 times)

0 Members and 1 Guest are viewing this topic.

Offline Amanda_931

  • Journeyman
  • *****
  • Posts: 3,066
  • Glamorous Middle Tennessee
Re: Making frame walls rigid
« on: March 16, 2006, 10:03:25 PM »
I've noticed that a lot of the all-glass super-engineered, architect designed places with glass to all possible corners have (probably oversized for looks) steel cables with turnbuckles to hold them square.  Usually crossed.  

I think they're ugly.  Mind you thin ones wouldn't look any better.

(and we had a small earthquake about 20 miles away last week)

Offline jb52761

  • Full Member
  • ***
  • Posts: 133
  • I love YaBB 1G - SP1!
Re: Making frame walls rigid
« Reply #1 on: March 17, 2006, 04:15:39 AM »
I would be willing to try the steel/metal banding idea, as far as wind damage. Sounds like a reasonable idea. Probably do a little dumpster-diving at some building sites too if I could get it free.

Offline glenn kangiser

  • The Troglodyte
  • Administrator
  • Journeyman
  • *****
  • Posts: 24,906
  • Central California Sierras- Home of Yosemite NP
    • Underground Cabin
Re: Making frame walls rigid
« Reply #2 on: March 17, 2006, 06:25:37 AM »
There are always these when you want to spend money.  Note they replace Code 1x4 let in brace - not shear wall requirements.

http://www.strongtie.com/products/connectors/WB-WBC-TWB-CWB-RCWB.html




See Simpson page for various styles.
« Last Edit: March 17, 2006, 06:27:23 AM by glenn-k »
"Always work from the general to the specific." J. Raabe

Glenn's Underground Cabin  http://countryplans.com/smf/index.php?topic=151.0

Please put your area in your sig line so we can assist with location specific answers.

Offline glenn kangiser

  • The Troglodyte
  • Administrator
  • Journeyman
  • *****
  • Posts: 24,906
  • Central California Sierras- Home of Yosemite NP
    • Underground Cabin
Re: Making frame walls rigid
« Reply #3 on: March 17, 2006, 09:13:45 AM »
"Always work from the general to the specific." J. Raabe

Glenn's Underground Cabin  http://countryplans.com/smf/index.php?topic=151.0

Please put your area in your sig line so we can assist with location specific answers.

Offline John Raabe

  • Administrator
  • Journeyman
  • *****
  • Posts: 5,550
  • Whidbey Island, WA
    • CountryPlans - About Us
Re: Making frame walls rigid
« Reply #4 on: August 24, 2009, 01:35:23 PM »
Here is a diagram of comparative wall rigidity.

None of us are as smart as all of us.

Offline Don_P

  • Journeyman
  • *****
  • Posts: 4,341
Re: Making frame walls rigid
« Reply #5 on: August 24, 2009, 04:49:21 PM »
This link has another good description and graphic (warning, tripod sites do have an ad popup you need to close)
http://mgacon0.tripod.com/plywood.htm

 

Templates: 5: index (default), Ads (default), Portal (default), Display (default), GenericControls (default).
Sub templates: 12: init, html_above, adsheaders_above, body_above, adsindex_above, portal_above, main, portal_below, adsindex_below, body_below, adsheaders_below, html_below.
Language files: 3: SPortal.english (default), index+Modifications.english (default), Ads.english (default).
Style sheets: 1: portal (default).
Files included: 35 - 1067KB. (show)
Cache hits: 12: 0.04386s for 38,711 bytes (show)
Queries used: 19.

[Show Queries]