Author Topic: Work bench's  (Read 2202 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Work bench's
« on: September 25, 2005, 12:12:19 PM »
  John Never use a tablesaw table for a work bench :o  Here's the work bench's :)
 Assembly bench.

  Work bench two views.




  • Guest
Re: Work bench's
« Reply #1 on: September 25, 2005, 12:30:02 PM »
Where are the tools? :)

Offline PEG688

  • Master Craftsman
  • Journeyman
  • *****
  • Posts: 3,525
  • Whidbey Island , Wa.
Re: Work bench's
« Reply #2 on: September 25, 2005, 12:43:10 PM »
Where are the tools? :)

  Your kidding , right?
When in doubt , build it stout with something you know about .

Offline n74tg

  • Senior Member
  • ****
  • Posts: 576
  • Hot Springs, AR
Re: Work bench's
« Reply #3 on: September 27, 2005, 04:26:48 PM »
I built a 4'x10' workbench 10 years ago that still works great for me; and it's portable (read that as reasonably easily movable).   All it is is just a 2x4 framework with an extra 2x4 (ten foot) running down the middle and covered with 3/4" particle board.  It sits on top of three saw horses.  This thing has been used for everything so it has that well used look.

It was originally built to help put together a full sized airplane kit (Zenith Zodiac 601).   As such it has about 10,000 rivet holes drilled in it - so the table looks like it has the measles - kinda gives it some extra character.
My house building blog:


Templates: 5: index (default), Ads (default), Portal (default), Display (default), GenericControls (default).
Sub templates: 12: init, html_above, adsheaders_above, body_above, adsindex_above, portal_above, main, portal_below, adsindex_below, body_below, adsheaders_below, html_below.
Language files: 3: SPortal.english (default), index+Modifications.english (default), Ads.english (default).
Style sheets: 1: portal (default).
Files included: 37 - 1132KB. (show)
Cache hits: 11: 0.00123s for 40,856 bytes (show)
Queries used: 29.

[Show Queries]