Wall Plugin for SketchUp

Started by Medeek, March 05, 2017, 12:03:48 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Medeek

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

Is 8,000 sqft too large? I'm going to say yes, at least for most people.



Besides the regular mdkBIM plugins I also used the grid tool (Medeek Project), but the regular SketchUp grid tool works just as well. A grid tool is a requirement in my opinion, you really need something like this for laying things out correctly.

I also used TIG's mirror tool for certain manual modeling tasks.

The trim and extend tools in the Medeek Project were also very handy for creating my diagonal braces.
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer


Medeek

Version 3.7.2 - 10.13.2024
- Fixed a critical bug with the in-wall column module.
- Added the following additional Wide Flange (W14) beams to the beam module: W14X38, W14X43, W14X48, W14X53, W14X61, W14X68, W14X74, W14X82, W14X90, W14X99
- Added the following additional Wide Flange (W16) beams to the beam module: W16X45, W16X50, W16X57, W16X67, W16X77, W16X89, W16X100
- Enabled a wood grain and an end grain material for glulam beams within the beam module.
- Enable additional built-in materials for "Custom" in-wall columns.
- Added the following (27 - low poly) Simpson column bases to the post module: CB7_6, CB1212, CB1012, CB1010, CB812, CB810, CB718_7, CB718_6, CB718_4, CB612, CB610, CB88, CB86, CB68, CB64, CB48, CB46, CB9_105, CB9_75, CB9_9, CB9_6, CB7_105, CB7_75, CB7_9, CB6_7, CB5_45, CB5_6
- Added the following (6 - low poly) Simpson column caps to the post module: CCQ84, CCQ86, CCQ94, CCQ96, CCQ98, CCQ106



Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

Version 3.7.4 - 10.22.2024
- Added the following (27 - low poly) Simpson post caps to the post module: 1616HTQ_8, 1616HTQ_6, BC8, BC6, BC4, BC46, RTC44, LCE4_64, LCE4_46, LCE4_6, LCE_4, AC4R_4R, ACH6_8, ACH6_4, ACH6_6, ACH6E_8, ACH6E_4, ACH6E_6, ACH4E_6, ACH4E_4, ACH4_6, ACH4_4, AC6_4, AC4_6, AC4_4, AC6_6, AC6R_6R

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer

Medeek

Version 3.7.5 - 10.23.2024
- Added the following (9 - low poly) Simpson post caps to the post module: LPC4_4, LPC4_6, LPC4_8, LPC6_4, LPC6_6, LPC6_8, PC4, PC6, PC8
- Added the following (10 - low poly) Simpson post bases to the post module: ECB88, ECB66, EPB66, EPB46, EPB44, MPB44, MPB66, MPB88, PPBF44, PPBF66



The post module now has 86 post caps and 65 post bases within its built-in library.  I think I've modeled about 75% of the Simpson Strong-Tie's Wood Construction Connectors Catalog at this point.
Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer


Medeek

Tutorial 53: Multi-Landing Stairs (10:21)

Nathaniel P. Wilkerson, P.E.
Designer, Programmer and Engineer