Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
Off Topic - Ideas, humor, inspiration / Re: Merry Christmas 2018
« Last post by Tyanchou666 on Today at 06:25:32 PM »
seo company

Because Google mainly determines the ranking of web pages according to the matching degree (correlation) between keywords and web content, a web page can not cover everything, so usually a web page can only be ranked according to some keywords. If your website only sells sports watches, the words watch is not suitable for you.
2
Referral Links / Re: Wall Plugin for SketchUp
« Last post by Medeek on Yesterday at 01:02:08 PM »
Version 2.1.2 - 05.10.2021
- Added logic into the add and draw menus to prevent users from using single and double quotes in preset names.
3
Referral Links / Re: Foundation Plugin for SketchUp
« Last post by Medeek on May 09, 2021, 06:50:53 PM »
Version 1.7.0b - 05.09.2021
- Components within foundations can also be made persistent and "subtractive" by naming the component instance to (subtract1, subtract2, subtract3, etc...)
4
Referral Links / Re: Wall Plugin for SketchUp
« Last post by Medeek on May 09, 2021, 03:12:59 PM »
Version 2.1.1b - 05.09.2021
- Components within wall panels can also be made persistent and "subtractive" by naming the component instance to (subtract1, subtract2, subtract3, etc...)
5
Referral Links / Re: Foundation Plugin for SketchUp
« Last post by Medeek on May 09, 2021, 11:36:54 AM »
Version 1.7.0 - 05.09.2021
- Added an option for subtractive geometry into the General tab of the Global Settings.
- Sub-groups within foundations and footings can be made persistent and "subtractive" by naming these groups to (subtract1, subtract2, subtract3, etc...)





Interestingly the code to make this happen was staring me in the face for months.  I essentially took the "roof connections" complex roof module, changed up the logic slightly, simplified it, and arrived at this new feature/ability. 

Notice that the subtractive groups cut through the rebar as well as the concrete.  Certain other elements such as anchor bolts (groups within groups) are not removed.  I may need to give this some additional consideration.

I guess we need to make this new feature available with the Truss plugin as well now.
6
Referral Links / Re: Foundation Plugin for SketchUp
« Last post by Medeek on May 09, 2021, 01:22:58 AM »
First look at a hole cut using the new SUBTRACT keyword system:



Now I just need to set this up for the other various foundation types (ie. stemwall, stemwall steps, strip footings etc...)
7
Referral Links / Re: Wall Plugin for SketchUp
« Last post by Medeek on May 08, 2021, 10:47:49 PM »
Version 2.1.1 - 05.09.2021
- Added an option for subtractive geometry into the Walls tab of the Global Settings.
- Sub-groups within wall panels can be made persistent and "subtractive" by naming these groups to (subtract1, subtract2, subtract3, etc...)





This is quite a major breakthrough for the wall plugin.  I've been trying to think of a way to enable (manual) customization of the wall geometry for quite some time, specifically subtractive modifications.  This system will now allow the user to achieve that goal.

Naming a group within the wall assembly to include the key word "CUSTOM" (case insensitive) will allow it to persist upon rebuild.

Naming a group within the wall assembly to include the key word "SUBTRACT" (case insensitive) will allow it to persist and boolean subtract from other groups within the assembly upon rebuild.

The subtractive group needs to be a valid solid for it to function correctly and its entity name needs to contain the key word "subtract" or "SUBTRACT".

What I like to do is create a special tag/layer for the subtraction geometry and then once I am done modifying or creating it I turn off the visibility of the layer/tag and only the holes or results in the wall geometry is shown.
8
Referral Links / Re: Wall Plugin for SketchUp
« Last post by Medeek on May 08, 2021, 01:28:08 PM »
Version 2.1.0 - 05.08.2021
- Added a 2D symbol for pocket doors to the top of the wall for the following wall types: rectangular, gable and shed.
- Introduced additional logic into the Custom Material Library to prevent users from using double or single quotes in custom material names.



9
Owner-Builder Projects / Re: What the Heck Was I Thinking - a 31x42 Remod
« Last post by Reninco on May 08, 2021, 07:12:41 AM »
Before and after pics…some are not quite at the right aspect but I usually include the same reference points.
Bad Load Drop

New Driveway

Front Entry

Front Right

Front Left

Garage Digout

Street View

Old Kitchen view

Old Staircase

Sunroom Inside

Sunroom Outside


...questions?
10
General Forum / Re: OFF GRID POWER; various thoughts on...
« Last post by Redoverfarm on May 07, 2021, 11:52:55 AM »
Dave thanks for the link.
Pages: [1] 2 3 4 5 6 ... 10
Templates: 4: index (default), Ads (default), Portal (default), Recent (default).
Sub templates: 12: init, html_above, adsheaders_above, body_above, adsindex_above, portal_above, main, portal_below, adsindex_below, body_below, adsheaders_below, html_below.
Language files: 3: SPortal.english (default), index+Modifications.english (default), Ads.english (default).
Style sheets: 1: portal (default).
Files included: 31 - 970KB. (show)
Cache hits: 11: 0.00094s for 40,660 bytes (show)
Queries used: 18.

[Show Queries]