Main Menu

Recent posts

#51
General Forum / Re: Spiral stairs on tile floo...
Last post by Don_P - October 14, 2024, 06:43:55 PM
It'll crack.
If you put a post on a footing directly under the spiral's post, then nothing is bending. I'd still install the stair first and then cut the tile around it and use sanded caulk for the grout line against the post (change of materials).
#52
General Forum / Questions about cinderblock st...
Last post by gladyshall - October 13, 2024, 12:31:02 PM
Hello,
I'm glad when joining the forum. I wonder how to make an addition to a cinderblock structure (concrete block & mortar). What is the proper method for joining new block walls to existing ones?  Can stick-framed walls be joined to block walls?
#53
Referral Links / Re: Wall Plugin for SketchUp
Last post by Medeek - October 13, 2024, 05:59:01 AM
Version 3.7.2 - 10.13.2024
- Fixed a critical bug with the in-wall column module.
- Added the following additional Wide Flange (W14) beams to the beam module: W14X38, W14X43, W14X48, W14X53, W14X61, W14X68, W14X74, W14X82, W14X90, W14X99
- Added the following additional Wide Flange (W16) beams to the beam module: W16X45, W16X50, W16X57, W16X67, W16X77, W16X89, W16X100
- Enabled a wood grain and an end grain material for glulam beams within the beam module.
- Enable additional built-in materials for "Custom" in-wall columns.
- Added the following (27 - low poly) Simpson column bases to the post module: CB7_6, CB1212, CB1012, CB1010, CB812, CB810, CB718_7, CB718_6, CB718_4, CB612, CB610, CB88, CB86, CB68, CB64, CB48, CB46, CB9_105, CB9_75, CB9_9, CB9_6, CB7_105, CB7_75, CB7_9, CB6_7, CB5_45, CB5_6
- Added the following (6 - low poly) Simpson column caps to the post module: CCQ84, CCQ86, CCQ94, CCQ96, CCQ98, CCQ106



#54
General Forum / Spiral stairs on tile flooring...
Last post by patrickgowan - October 11, 2024, 05:08:10 AM
Hello,
I am remodeling my kitchen and will be reinstalling my spiral staircase. Can I install it directly on top of the new ceramic tile flooring? 
The tiles are 12" x 24" ceramic tiles and will be installed on a crawl space foundation of 2 x 10 joists spaced 16 inches on center with 23/32 tongue and groove plywood over lapped with 19/32 plywood and 1/4 hardiebacker board subfloor. Should this be sturdy enough or will the tile and or grout crack?
#55
Referral Links / Re: Wall Plugin for SketchUp
Last post by Medeek - October 08, 2024, 08:24:16 PM
Is 8,000 sqft too large? I'm going to say yes, at least for most people.



Besides the regular mdkBIM plugins I also used the grid tool (Medeek Project), but the regular SketchUp grid tool works just as well. A grid tool is a requirement in my opinion, you really need something like this for laying things out correctly.

I also used TIG's mirror tool for certain manual modeling tasks.

The trim and extend tools in the Medeek Project were also very handy for creating my diagonal braces.
#56
Referral Links / Re: Medeek Floor Plugin
Last post by Medeek - October 06, 2024, 12:01:43 AM
One additional parameter for removing specific rim boards:

#57
Referral Links / Re: Medeek Floor Plugin
Last post by Medeek - October 04, 2024, 10:17:43 PM
Version 0.9.9e - 10.04.2024
- Updated 2-Ply rim joists with air gap to extend joists that are in a lapped configuration.
- Updated the Floor tab of the Global Settings with even more parameters for joist construction.
- Added the following face mount Simpson hangers into the built-in library: MIU1819, MIU18111, MIU18114, MIU18116, MIU18118.



#58
Referral Links / Re: Medeek Floor Plugin
Last post by Medeek - October 04, 2024, 05:48:29 PM
Double rim joists with air gap, lapped and extended:



A quick test of the non-orthogonal floor types shows that the algorithm holds up as it should:

#59
Referral Links / Re: Medeek Floor Plugin
Last post by Medeek - October 03, 2024, 05:46:50 PM
Version 0.9.9d - 10.03.2024
- Fixed critical bugs with saving of floor presets.
- Improved robustness of floor attribute library and data lookup methods.

Some incremental improvements but necessary. 

IMPORTANT
Note that the last few updates prior to this update introduced a number of new features that effectively disabled the saving of floor presets.  Please download this latest update to restore the ability to save floor presets.
#60
Referral Links / Re: Medeek Floor Plugin
Last post by Medeek - October 02, 2024, 12:41:32 AM
Version 0.9.9b - 10.01.2024
- Updated the Floor tab of the Global Settings with additional parameters for joist construction.
- Fixed a minor bug with the hanger module for double ply staggered studs.
- Fixed a bug in the Draw and Edit menus so that all hangers in the library are properly displayed.
- Added the following skewed (45 degree) Simpson hangers into the built-in library (skew_hangers): SUL410, SUL414, SUL214_2, SUL210_2, SUL26_2, SUR410, SUR414, SUR214_2, SUR210_2, SUR26_2