So I started the project before I started with the photos, so I do not have a before.
But these are the doors I took off. They were flimsy and offered no security at all. I put my foot through one trying to hold it still while removing it.
(https://i10.photobucket.com/albums/a137/oblivionboyj/oldbasementdoors.jpg)
Here is the hole in the basement ready accept the new frame.
(https://i10.photobucket.com/albums/a137/oblivionboyj/dscf1695.jpg)
Here is a shot of the steel side frames and the concrete header. There was a 3x6 wood header I removed for clearance.
(https://i10.photobucket.com/albums/a137/oblivionboyj/northsteelframe-1.jpg)
(https://i10.photobucket.com/albums/a137/oblivionboyj/southconcreteheader.jpg)
(https://i10.photobucket.com/albums/a137/oblivionboyj/northconcreteheader.jpg)
Here is the doors mocked in after I put in the new header. They are a matching set of steel faced exterior doors, with brass kick plates, that I found at a garage sale for $1 each.
(https://i10.photobucket.com/albums/a137/oblivionboyj/mockedinbasementdoors.jpg)
The new header is two 2x4s side by side with shims under them to fit the steel mount point.
On the header there is a 2x4 mounted thresh hold.
The door are going to swing out.
More to come as I take photos of progress...
Great find on the doors! [cool]
A dollar each for the doors?
You couldn't negotiate a better price? :)
Yeah, I love it when you find just what you need for almost nothing :)