Text only
|
Text with Images
CountryPlans Forum
General => General Forum => Topic started by: dug on December 01, 2009, 08:42:43 PM
Title:
subfloor question
Post by:
dug
on
December 01, 2009, 08:42:43 PM
plywood tongue and groove subflooring- knock it together tight or leave a gap? I've heard both ways.
Title:
Re: subfloor question
Post by:
MountainDon
on
December 01, 2009, 09:12:55 PM
Lightly butt the T&G edges together, there will be sufficient spacing on that joint if done like that. Spece the square cut 4 foot edges 1/8" apart.
Text only
|
Text with Images