I am having trouble finding the two alternative materials described to use for the rim joist (Timberstrand LSL or plywood w/ blocking panels). I checked HD and Loews. Can I just use regular 2x12s?
Thanks, M
You can IF you buy the next size up 2 x then rip it down.
TJI's / BCI's etc are made in odd dementions , like 9 1/2" when a 2x10 is generally 9 1/4" >:( , or the ever popular 11 7/8" I joist when 2 x12's ::) measure , ussually , 11 1/4". ::)
The real question is why?? :-/ :-/
Which isn't really hard to answer , they want to sell LSL to go with thier " I" joist, ::) but there is no good reason you can not use 2 by's other than the height issue. Thats what we used to do before they made LSL.
Why would I have to rip it down? Don't I want the floor joists and the sill joists the same width (i.e. same height once placed on the sill)? I'm using 2x12s for the floor joists so couldn't I just use un-ripped 2x12s for the sill joists?
Thanks, Mischa
I missed that part where you said 2x12's sorry , I was giving a genric answer to your question , so yes you'd have to build up the 2by to flush up with the TJI , they must be 11 7/8" ?? The ones we get here in Washington measure 11 7/8" , so some 5/8 ply nail to the top of a 2x12 should flush it up.
If you pick them out , the 2 x12's , pick straight , or the straightest / less crowned ones. Out of the bunch your picking from. It makes it easier.
One of my grumbles of late is the LSL we've been getting have all had 3 16" crown's to them >:( The , well one of , selling points to LSL is that it is straight, which ain't really true any more . Must have something to do with profit share , market saturation, demand . >:( ::)