This isn't so bad , soffit below door bay,
(https://i21.photobucket.com/albums/b299/PEG688/June62.jpg)
Door jamb , 2nd floor un covered deck,
(https://i21.photobucket.com/albums/b299/PEG688/June611.jpg)
(https://i21.photobucket.com/albums/b299/PEG688/June612.jpg%20)
(https://i21.photobucket.com/albums/b299/PEG688/June613.jpg)
(https://i21.photobucket.com/albums/b299/PEG688/June614.jpg)
Not a good photo but that's the ladder on the deck below :o
(https://i21.photobucket.com/albums/b299/PEG688/June610.jpg%20)
Path / walkway all the stuff must go up and down on , steeper than it look's .
Who needs a stinkin stair master ;D
(https://i21.photobucket.com/albums/b299/PEG688/June65.jpg)
(https://i21.photobucket.com/albums/b299/PEG688/June64.jpg)
Joist and beams in soffit from below :o
Many issue's here , door jambs rotted, under door flashing to small , corners not flashed , typar not wrapped at corners.
Radiant floor heat in lightwieght concrete, 3/4 T&G maple floors .
Very hard repair >:( Oh well it's a livin , might kill me but in the mean time it puts beans on the table .
Flash it , wrap it , keep it painted , Jambsills , etc.
:-[ Wow....that is scary. My weekness is flashing. I put bays in my house, even extending the floor out.(3 so far, I love them). I suck at bending and flashing....and of course I have a leak on one I can't find. That was a previous install of mine, with 3/4" plywood seat board (prior to my floor bump out style ) and some of the framing was rotten and decomposing. It still leaks a little.... What to flash and how could be a book me thinks....... :-/
I was nearly arrested for flashing. :-/ Just kidding ------really -----
QuoteI was nearly arrested for flashing. :-/ Just kidding ------really -----
Only arrested ;D I'm thinkin shot :o well at least shot at ;)
This isn't me flashing. Really. :-/
(https://i35.photobucket.com/albums/d184/glennkangiser/flashing20scores.jpg)
Glenn you and your silly antic's ::) Here I post a serious subject and you drag it into the gutter ;D
Here's the new door's :
(https://i21.photobucket.com/albums/b299/PEG688/June1510.jpg%20)
(https://i21.photobucket.com/albums/b299/PEG688/June159.jpg%20)
Almost like I was never here/ there ;) Althought I caught myself in the reflection ::) So much for the shadow ;)
QuoteGlenn you and your silly antic's ::) Here I post a serious subject and you drag it into the gutter ;D
Crimony PEG -- I thought I was right out in plain sight. Did I ever tell you about the time I rode a motorcycle across the desert 8 miles at the hot spring..... Oh yeah ----family forum TMI :-/
Really nice job by the way. :)
Here's a few more reasons for proper flashing detail , stay calm Glenn ::)
Different house same sort of issue's, mostly. About 8 year old remodel
(https://i21.photobucket.com/albums/b299/PEG688/June254-1.jpg%20)
Deck above not flashed at all , just caulked >:(
(https://i21.photobucket.com/albums/b299/PEG688/June253-1.jpg)
Concrete poured right up to sheathing , bad idea , plywood / OSB more so is like a sponge if it can it will lap up the water.
(https://i21.photobucket.com/albums/b299/PEG688/June256.jpg%20)
Should be at least 12 % or below , average around here is 10% moisture content exterior of house , 8% or lower indoors , generally varies a bit with season.
(https://i21.photobucket.com/albums/b299/PEG688/June258.jpg)
Corner brd valley / cricket interection hard to defend / flash.
(https://i21.photobucket.com/albums/b299/PEG688/June247.jpg%20)
Add a gutter at the end and a trim brd the below that is bass acwards leading water in , again only caulked and you get ,
(https://i21.photobucket.com/albums/b299/PEG688/June252-1.jpg%20)
Ahhh Issues >:(
(https://i21.photobucket.com/albums/b299/PEG688/June2510.jpg)
Remodeler tool for pulling nails out from under , what ever it's under ;D
(https://i21.photobucket.com/albums/b299/PEG688/June259.jpg)
I'm totally not sold on Typar this corner is like old blue jeans , it's 8 years old , maybe they (former remodeler left it exposed for to long , don't know . What I do know is it is worthless at this point >:(
(https://i21.photobucket.com/albums/b299/PEG688/June2512.jpg%20)
My cricket to fix the issues in this area , other things like no metal flashing at window and door heads , I'll address when and where I can .
To repeat myself, [highlight]CAULKING IS NOT FLASHING[/highlight] , don't use it as such .
We now return you to Glenn doing what Glenn does , ;D
(https://i35.photobucket.com/albums/d184/glennkangiser/flashing20scores.jpg%20)
Heee heeee he , jees I crack me up ;D
It's getting hot here this summer -- think I'll have to lose the trench coat.
I have the shingle remover/remodeling nail puller tool. I bought it to use as a peeling spud for taking the bark off of logs.
Hey - a 9 is not too bad. :-/
Quote
Hey - a 9 is not too bad. :-/
She old and blind Glenn , thinks you might be the Lil Asia dude ;D ;D
Glenn just said "PEG's gonna have to go back to church & get some forgiveness."
QuoteGlenn just said "PEG's gonna have to go back to church & get some forgiveness."
You don't find forgiveness in church. But I get his meaning ;D ;D
You and my wife, PEG. Always giving me a bad time. :-/ :)