Started by MountainDon, January 13, 2009, 02:18:39 AM
0 Members and 1 Guest are viewing this topic.
Quote from: MountainDon on May 17, 2011, 05:25:12 PMMy question is; is that watt hours row the watt hours going into the batteries from the panels? That's what I think it is. That indicates your system plowed 1140 watt hours into the batteries on Sat because your Friday use dragged the batteries down to a low point of 12.27 volts. And Friday you can tell you either arrived after the best sun had gone or it was a lousy sun day; 420 watt hours.Saturdays absorb time was very low (70 minutes) which would lend itself to a long bulk charge before the sun went away or a day with clouds or a combination. Then Sunday when you took the snapshot the system had not yet recharged much as the max volts were still down from where iy usually peaks. Also the watt hours are still low and the absorption charge only just reached 1 minute.
Quote from: OlJarhead on July 05, 2011, 12:29:45 PMOutput Power Watts' appears to be the amount of power produced by the controller and sent to the batteries and not the power coming off the array .....
Quote from: OlJarhead on July 19, 2011, 10:01:52 PMhttp://www.sunelec.com/sun-laminate-118-watts-2430-vmp-p-785.htmlI'm hoping to get this panel for my well solar...if I can get close to the price they were offering for 10 of them.