11 mm allen wrench

Started by peternap, July 09, 2008, 08:24:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

peternap

I needed an 11 mm Allen wrench to change the oil in my XL600. I can't find one locally. I guess I'll have to order one. I'm sure Mcmaster Carr has them.

For the life of me, I don't understand why the company's don't at least use a 10 or a 12mm, if they just have to use these 3rd world measurements.

I had to regrind a 12mm to change the oil >:( >:( >:( >:( >:( >:( >:( :(
These here is God's finest scupturings! And there ain't no laws for the brave ones! And there ain't no asylums for the crazy ones! And there ain't no churches, except for this right here!

Redoverfarm

Peter it wouldn't make any difference there is always a size I don't have.  Learned to go to Harbor Freight and buy a cheap set of Allens and Metric Winche's to handle all the imported goods that we buy so cheap. I would even say that Wally World would have one in their limited tool section not far from the paint department.


glenn kangiser

Good on you, Peter.  I was going to say an 11 is just a 12 that got too close to the grinder.
"Always work from the general to the specific." J. Raabe

Glenn's Underground Cabin  http://countryplans.com/smf/index.php?topic=151.0

Please put your area in your sig line so we can assist with location specific answers.