|
Jimmy_Cason
Guest
|
 |
« on: January 06, 2006, 08:41:01 PM » |
|
(From John R. 11/26/07) There are many pages of information about this fine owner builder house. (Click blue page numbers at top left to go directly to a page.) • Here is a link to COSTS - scroll down 2/3's of page where Jimmy explains the $28,000 he has spent getting to this point. • To see the customized Floor Plan Layout and early construction photos scroll down this page. • Link to the construction PLANS. Here is a link to Jimmy's Photo Update (outside the forum on Flickr)   |
|
|
|
« Last Edit: November 26, 2007, 11:41:03 AM by John Raabe »
|
Logged
|
|
|
|
|
glenn-k
Guest
|
|
« Reply #1 on: January 07, 2006, 05:42:03 AM » |
|
Nice collection of pictures, Jimmy. It really adds to your story. The keywords you used in your title should allow us to find this several ways.
|
|
|
|
|
Logged
|
|
|
|
|
glenn-k
Guest
|
|
« Reply #2 on: January 07, 2006, 05:57:45 AM » |
|
That sounds like a good idea, Daddymem. I'm going to leave it to John to do if he sees fit, --too many choices on board settings for me.
|
|
|
|
|
Logged
|
|
|
|
|
Daddymem
Guest
|
|
« Reply #3 on: January 07, 2006, 06:57:30 AM » |
|
I think it would be a huge help, thanks. I just remember that fateful day I typed "Country Plans" into Google and was directed here. It was very intimidating, this didn't have the face of a DIY site, all the posters had the appearance of being experts and here I was barely knowing how to hold a hammer. I saw the gallery and thought those were beautiful houses but I can't do that. I eventually saw some posts with owner builders and saw they weren't very different from me...but that took a while, there are sooooo many posts on here. You might not think to search for posts showing construction of the plans on this site. I think if I found the forum for the first time and saw a section "Projects by CP Members" and there were all these people of different backgrounds building their own beautiful homes it would have convinced me sooner to take up a hammer (yeah, yeah, hammer is getting in this hand soon enough). I have a feeling there are a ton of lurkers on this board who may be convinced to start their own project up and we may never hear that they exist, but they would be thrilled to have a single place to get ideas on building their own dreams and maybe they will share a blog, photo page, or their own website. I know Mommymem and I plan on documenting how far we have gone and documenting our progress, probably like Dustin. I can also think of many times I tried to find the picture I saw on CP, but for the life of me I couldn't...I knew it was a 20x30 1.5 story...but who??? Sorry, the IT Manager side of me coming out I guess...my mantra "make it easy and they will use it"  |
|
|
|
« Last Edit: January 07, 2006, 06:59:24 AM by Daddymem »
|
Logged
|
|
|
|
|
jraabe
Guest
|
|
« Reply #4 on: January 07, 2006, 08:25:13 AM » |
|
Good suggestion Daddymem - and thanks Jimmy for the updated photos.
I will try to get this new forum set up this weekend and then both Glenn and I can move threads around once we have the structure in place.
|
|
|
|
|
Logged
|
|
|
|
|
Daddymem
Guest
|
|
« Reply #5 on: January 07, 2006, 09:26:56 AM » |
|
Wow! Quick action, looks great!
|
|
|
|
|
Logged
|
|
|
|
|
glenn-k
Guest
|
|
« Reply #6 on: January 07, 2006, 09:40:55 AM » |
|
It really works out nice - it comes out right in the middle of the forum front page. No more looking all over the place for examples.  |
|
|
|
|
Logged
|
|
|
|
|
Daddymem
Guest
|
|
« Reply #7 on: January 07, 2006, 10:47:39 AM » |
|
Jimmy's post is the perfect prototype!
|
|
|
|
|
Logged
|
|
|
|
|
phalynx
Guest
|
|
« Reply #8 on: January 08, 2006, 11:55:02 AM » |
|
Jimmy, Do you have a drawing or plan you can post on the extra 6 feet on the 20x40? I am interested to see where you used them.
thanks,
Scott
|
|
|
|
|
Logged
|
|
|
|
|
Jimmy_Cason
Guest
|
|
« Reply #9 on: January 08, 2006, 02:09:16 PM » |
|
Jimmy, Do you have a drawing or plan you can post on the extra 6 feet on the 20x40? I am interested to see where you used them.
thanks,
Scott This is a rough drawing of what I have in mind. The only thing that is for sure right now is the 20x40 perimeter and the location of the stairs. As I build it I am able to better visualize what will work better or look better.Things like move this door here, make this door a sliding door, move this closet here, ect.   |
|
|
|
« Last Edit: January 09, 2006, 04:59:09 AM by Jimmy_Cason »
|
Logged
|
|
|
|
|
jraabe
Guest
|
|
« Reply #10 on: January 09, 2006, 04:40:48 PM » |
|
Nice layout Jimmy. Feels spacious.
|
|
|
|
|
Logged
|
|
|
|
|
Jimmy_Cason
Guest
|
|
« Reply #11 on: February 17, 2006, 05:15:31 AM » |
|
Just delivered Feb 16th, Second story 3/4"sub-floor, Windows and doors for the first floor,
Tyvek wrap for the first floor ( I Know, I Know....)
Because of the weight, I was afraid to let the delivery guy put the pallet of sub flooring up on the joists. So I had to lift and partially install 25 sheets of 3/4" by myself. At least I didnt put in 1-1/8" like I did on the first floor! I ran out of daylight before I could finish and had to go back to work Friday. I will head back out there Saturday if the road conditions will allow. We are finally getting some winter weather here in Texas. I seem to schedule my deliveries according to bad weather!
|
|
|
|
« Last Edit: February 28, 2006, 12:18:15 PM by Jimmy_Cason »
|
Logged
|
|
|
|
|
Chuckca
Guest
|
|
« Reply #12 on: February 17, 2006, 12:26:29 PM » |
|
http://pg.photos.yahoo.com/ph/jimmycason40/detail?.dir=ac0b&.dnm=5540re2.jpg&.src=phTake a look at this image. Where is the crawl space on the low side (left)? I thought you needed 18" min for ground clearence all around. How are going to lay a moisture barrier and install insulation? Looks close to me on the low side. I'm a newbie here and haven't built YET. Set me straight. Thanks! Btw: Your project is looking sweet!
|
|
|
|
« Last Edit: February 17, 2006, 12:53:57 PM by Chuckca »
|
Logged
|
|
|
|
|
Jimmy_Cason
Guest
|
|
« Reply #13 on: February 17, 2006, 01:21:54 PM » |
|
http://pg.photos.yahoo.com/ph/jimmycason40/detail?.dir=ac0b&.dnm=5540re2.jpg&.src=phTake a look at this image. Where is the crawl space on the low side (left)? I thought you needed 18" min for ground clearence all around. How are going to lay a moisture barrier and install insulation? Looks close to me on the low side. I'm a newbie here and haven't built YET. Set me straight. Thanks! Btw: Your project is looking sweet!  That picture is a bit deceiving. Look below at this earlier pic of the same side. My frame is made up of 3 support beams, then I added the 2x8 floor joists. The double 2x12 board across the front was added as an after thought. The support beam on the left is about 6- 10" off the ground plus 11-1/4" for the 12" beam That puts my floor joists around 18 inches above the ground. I knew it was a little on the short side of what it should be. But I did this to keep the far right side under 5 feet off the ground. I hope I dont have to fight it later on. all of the lumber on the platform is treated except for the subfloor.  |
|
|
|
« Last Edit: February 17, 2006, 01:52:31 PM by Jimmy_Cason »
|
Logged
|
|
|
|
|
jraabe
Guest
|
|
« Reply #14 on: February 18, 2006, 08:30:00 AM » |
|
You shouldn't have any problem with access there. The framing looks great and the PT joists and all will give you a very long lifetime. What kind of treatment does the wood have, and what was it like to work with? I know many areas have phased out CCA wood and the newer stuff is supposed to be safer to use and work with.
|
|
|
|
|
Logged
|
|
|
|
|
Jimmy_Cason
Guest
|
|
« Reply #15 on: February 20, 2006, 06:55:13 AM » |
|
I am pretty sure it was CCA. But, it might not have been. I bought the Pressure treated wood from McCoys lumber around March 2005 and it was still very wet. So maybe it was one of the newer treatments. As far as working with the wood, It was a little more difficult that the non-treated because of the weight. It was much heavier. It was a little more difficult cut.
I didn[ch8217]t get any work done this weekend. We had freezing rain all across North Texas. It was hard sitting at home knowing I have material there and waiting to be installed!
|
|
|
|
|
Logged
|
|
|
|
|
glenn-k
Guest
|
|
« Reply #16 on: February 20, 2006, 07:20:08 AM » |
|
Don't feel too bad, Jimmy - we still have six inches of snow. I plan on shaking off some of it today and doing at least something. :-/
|
|
|
|
|
Logged
|
|
|
|
|
Jimmy_Cason
Guest
|
|
« Reply #17 on: February 21, 2006, 08:20:25 AM » |
|
Because of the weight, I was afraid to let the delivery guy put the pallet of sub flooring up on the joists. So I had to lift 25 sheets of 3/4" by myself. At least I didnt put in 1-1/8" like I did on the first floor!
Working alone tip#201 This is how I got those 3/4" 4 x 8 subfloor sheets on top by myself. I nailed a 4 foot long 2x6 across a couple of 8 foot 4x4s. Placed the 4x8 sheets up on the leaning assembly and ran inside, up the ladder and pulled the sheet on up.  |
|
|
|
« Last Edit: March 13, 2006, 05:24:56 AM by Jimmy_Cason »
|
Logged
|
|
|
|
|
pforden
Guest
|
|
« Reply #18 on: February 21, 2006, 10:48:25 AM » |
|
Jimmy,
Thanks for the terrific pictures.
What part of Texas are you in?
Penny
|
|
|
|
|
Logged
|
|
|
|
|
Jimmy_Cason
Guest
|
|
« Reply #19 on: February 21, 2006, 11:30:32 AM » |
|
http://www.flickr.com/photos/jimmycason/sets/ Hi, Penny The nearest town is called Rhonesboro. Pop.40
|
|
|
|
« Last Edit: September 15, 2007, 04:50:31 PM by Jimmy_Cason »
|
Logged
|
|
|
|
|
